Locations

Our studio and depot is by appointment only. Please contact us for more information.

Tel: (914) 760-1119

Email

Marmoclassic Application

Marmoclassic application notes tips and tricks to help get the best results from the finish.

We always recommend that you apply a base coat of Marmocarrara with any application involving Marmoclassic, Marmocarrara, Marmobreccia, Marmodorato, Marmocorallo and Grassello Lucido. This will help with ease of application due to the amount of extra suction added by the base coat.

Step 1:

Apply a first coat of Marmocarrara quite liberally and making sure to keep as many ridges and trowel imperfections out of the base coat as possible. It will be OK to fall back on what you have spread after about 10 minutes and flatten it down a little. This may be White or colored, we recommend colored.

Allow this coat to fully dry over night.

Step 2:

Apply second coat of finish but this time it will be applied using less material than in the previous step and again keeping ridges and trowel imperfections to a minimum.

Allow this to dry for about an hour until you cannot see any wet spots, then proceed with the final coat.

This one will be applied much tighter than the previous one. After about each square meter it will be necessary to fall back and begin to burnish, sometimes another applicator will best be suited to carry out this process only. Allow this coat to fully dry over night.

Step 4:

Apply a coating of either Liquid Beeswax or Marseille Soap Paste sealer.

Important Information - Please Note

Please note that we no longer provide Venetian stucco products or finishes to the general public due to a very busy schedule with our own work. We will however continue to supply to our existing customers and clients from our Venetian Stucco New York depot.

Booklets of a selection of our popular samples are available to Architects and Interior Designers upon request.